Mantis Mounts

Welcome to Pro-Techt's Mantis Mounts Section!  

Contained herein are all of our Mantis Mounts.   We have multple mounting brackets which connect in various ways to help you get shade where you want it.

Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page
  • Kayak Mount

    Kayak Mount

    Common Uses: Fits most sit-on-top kayaks.   Mount has adjustable width (15.25" - 26.5") to attach from gunnel to gunnel of your Kayak (via well nuts) behind your kayak seat to provide a connection point for your Mantis.  Our Kayak Mount is typcially used with Mantis Junior Pro/Pro Plus Models.  

    Dimensions: 15.25" -  26.5" L x 3.5" W x 1" H (Height of horizontal base, Post rises 3" out of base).  Alternatively, for short gunnels you can remove the outside sliding pieces and simply use the "inside" piece (the piece with the Post welded to it) for widths of 13.75"-14.25".

    Contents: 1 - Kayak Mount  (silver powder-coated aluminum) and hardware  4- SS screws and well nuts.

    For more information on our Kayak Mount and using the Mantis with Kayaks click on: Kayaks
    Learn More
    $59.99

  • Mantis Seat Mount

    Mantis Seat Mount

    This "universal" seat mount works on both Swivel and Butt/Pro Style Swivel seats.  

    Common Uses: Standard Swivel boat seats (screw connection) and Butt/Pro Seats.  It can also be uses on other types of seats by screwing the mount into bottom of seat.

    Dimensions: 17.8" L x 7.5" W

    Contents: 1 - Swivel Seat Mount (silver powder coated aluminum)

    Learn More
    $59.99

  • Rail Mount

    Rail Mount

    Common Uses: Vertical and Horizontal Round, Oval and Square Rails/ Railings and Chairs with a Rail or Tubular Frame, handle on back of seat on many jet ski's 

     Rail or Tube diameters this mount will fit:   

    ♦ Round Rails with .75-1.67 inch diameter (Horizontal).                                 

    ♦ Round Rails with .5-1.67 inch diameter (Vertical).                                                                  

    ♦ Square Rails .75-1.5 inch diameter (Horizontal). 

    ♦ Square Rails .5-1.67 inch diameter (Vertical).

    Dimensions: 6.2" L x 2.75" W x 3.1" H (Height of screw plate).

    Contents: 1 - Rail Mount with hardware (silver powder-coated aluminum); 4-2" SS screws and hex wrench (included), Rubber Rail Protector. 

     
    Learn More
    $44.99

  • Suction Mount

    Suction Mount

    Common uses:   Temporary use on any dry, flat, smooth horizontal or vertical  surface area that is greater than or equal to  5" x 12.80" . 

    Dimensions:  Suction Mount Portion: 12.75" L x 4.5" W x 7.5" H;  Rail Mount Portion: 6.2" L x 2.75" W x 3.1" H (Height of screw plate).

    Contents:  1 - Suction Lifter (Aluminum); 1  - Rail Mount (silver powder-coated aluminum).

    Learn More
    $69.99

  • Rod Holder/Umbrella Stand Adjustable Mount

    Rod Holder/Umbrella Stand Adjustable Mount

    Common Uses:  Umbrella Bases, Rod Holders and Rocket Launchers with inside tube Diameter of 1.5"-2"; (spacers can be used for larger diameters).

    Dimensions: Post 3" x 1.74", Inside 5.85" x 1.5".

    Contents:  Adjustable Umbrella Base/Rod Holder Mount  (Aluminum w/stainless screw).

    Learn More
    $49.99

  • Clamp Mount

    Clamp Mount

    Common Uses: Deck Rails, Grills, Square Rails, Picnic Tables

    Dimensions:  Clamp area:1.5"L x 3"W x 2.25" H (H = Maximum thickness of surface Clamp Mount will fit)

    Contents:  1 - Clamp Mount  (Powder Coated Aluminum)

    Learn More
    $44.99

  • Semi-Flush Deck Mount

    Semi-Flush Deck Mount

    Common uses:  Floors and Decks, Top of Consoles, Any Flat Surface.

    Dimensions:  Overall: 3.1" Dia. x 4.05" H;  Base: 3.1” Dia x .40”.

    Contents:     - 1 -  Semi-Flush Deck Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws.

    By purchasing additonal Semi-Flush Bases/Backplates you can cost effectively leverage this mount to create multiple locations to use your Mantis!

    Note: We recommend reinforcing your mount by using our Semi-Flush Backplate (and bolting through the material) when installing on relatively thin and/or soft surfaces/materials.

    Learn More
    $49.99

  • Semi-Flush Mount Base/Backplate

    Semi-Flush Mount Base/Backplate

    Common uses:  Use either as additional bases for your Semi-Flush Mount or as a Back Plate for your Semi-Flush Mount Bases.   Use on Floors and Decks, Top of Consoles, Any Flat Surface.

    Dimensions:  Overall:  Base: 3.1” Dia x .40”.

    Contents included:  1 -  Semi-Flush Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws.

    Learn More
    $19.99

  • Deck Mount

    Deck Mount

    Common Uses: Boat or Deck Floor, Console Tops, Flats Boat Platform, any Flat Surface; Optional Back Plate Available.  

    Dimensions:  4.25" Dia. x 3.42" H.

    Contents:  1-  Deck Mount (powder-coated aluminum),  6 - #10 x 1" Stainless Screws.  

     

    Note: We recommend reinforcing your mount by using our Deck/Side Backplate (and bolting through the material) when installing this Mount on relatively thin and/or soft surfaces/material.


    Consider our Semi Flush Deck Mount as a premium alternative to our standard Deck Mount.

    Learn More
    $39.99

  • Side Mount

    Side Mount

    Common Uses: Fits any Vertical Surface or Side Walls: Deck Rails, Consoles, Seat Backs.

    Dimensions:  Screw Plate: 4.2" W x 2.6" H; Length out from Plate: 4.32";  Overall Height at post: 5.11".

    Components:  1- Side Mount (silver powder coated aluminum); 4 SS screws included; Optional Back Plate available.

    Note: We reccomend reinforcing your mount by using our Deck/Side Backplate (and bolting through the material) when intalling on relatively thin and/or soft surfaces/material.

    Learn More
    $39.99

Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page