Semi-Flush Deck Mount Zoom

Semi-Flush Deck Mount

Be the first to review this product

SKU: MBSFM0015

Common uses:  Floors and Decks, Top of Consoles, Any Flat Surface.


Dimensions:  Overall: 3.1" Dia. x 4.05" H;  Base: 3.1” Dia x .40”.


Contents:     - 1 -  Semi-Flush Deck Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws.


By purchasing additonal Semi-Flush Bases/Backplates you can cost effectively leverage this mount to create multiple locations to use your Mantis!


Note: We recommend reinforcing your mount by using our Semi-Flush Backplate (and bolting through the material) when installing on relatively thin and/or soft surfaces/materials.

Share it now!

Availability: In stock

$49.99
  • Product Description

      Details

      Common uses:  Floors and Decks, Top of Consoles, Any Flat Surface.


      Dimensions:  Overall: 3.1" Dia. x 4.05" H;  Base: 3.1” Dia x .40”. 


      Contents:     - 1 -  Semi-Flush Deck Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws.


      Mounting Instructions: (click here for illustrated mounting instructions)


      1.  SELECT LOCATION, TAKE MOUNT BASE, MARK AND DRILL HOLES, INSTALL BASE.

      Take the round base, and with the smooth side facing upwards(grooves on the bottom), place where

      you want to use your Mantis. Using the base's holes as a template, pencil the 3 hole locations onto

      the mounting substrate. With a 3/16 inch diameter bit, drill holes in the marked positions. With a

      Phillips screwdriver, install the round Base, using the 3 supplied screws. Be sure all screws are

      securely tightened. If using Pro-Techt's optional back plate in conjunction with the Semi-Flush

      mount, refer to the instructions that come with the back plate.

       

      2. THREAD RING LOCK ON POST (Inside Lip facing down), TAKE POST/RING LOCK

      AND ALIGN WITH BASE, SCREW POST INTO BASE, HAND TIGHTEN RING LOCK CLOCKWISE.

      If needed, thread the Ring Lock onto the Post (counter clockwise) with the inside lip of the Ring Lock

      facing down. Then take the Post/Ring Lock and align with the threads on the inside of the Base and

      screw (clockwise) the Post all the way into the Base. Then take the Ring Lock and firmly hand tighten

      clockwise. To remove Post, turn Ring Lock counter-clockwise and unscrew post from Base.

       

      3. INSTALL MANTIS.

      Now place the Mantis assembly onto the vertical post of the bracket, and lock in place.

      Refer to the manual supplied with Mantis for detailed instructions.

    Product's Review

      Write Your Own Review

      You're reviewing: Semi-Flush Deck Mount

    Product Tags

      Use spaces to separate tags. Use single quotes (') for phrases.

    CMS tab