Skip to Store Area:

Magento Commerce

You're currently on:

Search Site

Post Mount

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Post Mount

Common uses:    Sturdy, flat surfaces that Post can be bolted through, Roll Bars, Trailer Hitches (w/O Ball); Serves as "utility" mount. provides the universal "Post" portion of our mounts to enable customized mounting  


Dimensions:  3.125" H x 1.74 Outside Dia.  


Contents:  - 1 Post Mount w Plastic Cap


Note: You will need to secure a bolt, nut, and washers based on your needs

Availability: In stock.

$19.99
Add Items to Cart Add to Cart
Remember: A Mantis unit consists of both a mount and a Mantis cover. Remember not to purchase one without the other. You can also get both at the same time.



Common uses:    Sturdy, flat surfaces that Post can be bolted through, Roll Bars, Trailer Hitches (w/O Ball); Serves as "utility" mount. provides the universal "Post" portion of our mounts to enable customized mounting  


Dimensions:  3.125" H x 1.74 Outside Dia.  


Contents:  - 1 Post Mount w Plastic Cap; Note: You will need to secure a bolt, nut, and washers based on your needs


Mounting Instructions: (click here for illustrated mounting instructions)


 


1. SELECT LOCATION; DETERMINE BOLT LENGTH


Using the post mount as a template, pencil the hole location onto the


mounting substrate. Drill hole with 3/8" drill bit. If hole already exists, align


post mount with hole. Note you can install the mount through a larger hole


than 3/8", Just be sure the washer you use is larger than the hole. Measure


required bolt length and purchase a stainless steel 3/8" bolt of appropriate


length, 2 washers and nut.


2. INSTALL MOUNT


With a rachet and pliers place bolt with washer through the inside hole of


the post mount and connect nut on opposite side (ad washer first). Securely


tighten the nut. Place black plastic cap over the open end of the mount and


push down until top of cap touches the top of the post mount.


3. INSTALL MANTIS


Now place the Mantis assembly onto the vertical post of the


bracket, and lock in place. Refer to the manual supplied with


Mantis for detailed instructions.