Common Uses: For use with larger diameter Rails than our standard Rail Mount. Fits round, oval and square rails/ tubing, and many handles on back of seat of jet ski's
Rail or Tube diameters this mount will fit: Round, Oval, Square Rails; Horizontal Rails: 1.25" - 2.0" outside diameter; Vertical Rails up to 2.625" outside diameter
Contents: 1 - Rail Mount with hardware (silver powder-coated aluminum); 4- SS screws
1. SELECT RAIL LOCATION
Choose a railing that will provide a sturdy mounting base for Mantis
immediately behind the desired seating/standing area.
2. INSTALL BRACKET
Wrap the provided thin plastic sheet around rail. Cut to size as desired. With a
5/32 allen wrench unscrew the screws and align mount parts to rail and start
each screw. Tighten all 4 cap screws securely being sure to use the supplied lock
washers. Note: For vertical rail applications rotate the smaller mount part 90
degrees before inserting and tightening screws. We recommend that you
apply a small amount of anti corrosion solution such as Corrosion Block to the
screws during installation and occassionally thereafter for optimal results.
3. INSTALL MANTIS
Now place the Mantis assembly onto the vertical post of the bracket, and lock in place. Refer to the manual supplied with Mantis for detailed instructions.