Common uses:   Temporary use on any dry, flat, smooth horizontal or vertical  surface area that is greater than or equal to  5" x 12.80" 

Dimensions:  Suction Mount Portion: 12.75" L x 4.5" W x 7.5" H;  Rail Mount Portion: 6.2" L x 2.75" W x 3.1" H (Height of screw plate)

Contents:  1 - Suction Lifter (Aluminum); 1  - Rail Mount (silver powder-coated aluminum) 

Common Uses: For use with larger diameter Rails than our standard Rail Mount.  Fits round, oval and square rails/ tubing, and many handles on back of seat of jet ski's 

Rail or Tube diameters this mount will fit:  

Rail or Tube diameters this mount will fit:  Round, Oval, Square Rails; Horizontal Rails: 1.25" - 2.0"  outside diameter; Vertical Rails up to 2.625"  outside diameter

Dimensions: 

Contents: 1 - Rail Mount with hardware (silver powder-coated aluminum); 4- SS screws 

Common Uses:  Umbrella Bases, Rod Holders and Rocket Launchers with inside tube Diameter of 1.5"-2"; (spacers can be used for larger diameters)  

Dimensions: Post 3" x 1.74", Inside 5.85" x 1.5"

Contents:  Adjustable Umbrella Base/Rod Holder Mount  (Aluminum w/stainless screw) 

Common Uses: Standard Swivel boat seats (screw connection), can also be uses on other types of seats by screwing the  mount into bottom of seat.  

Dimensions:  17.8" L x 7.5" W 

Contents: 1 -  Swivel Seat Mount (silver powder coated aluminum)

Common Uses: Vertical and Horizontal Round, Oval and Square Rails/ Railings and Chairs with a Rail or Tubular Frame, handle on back of seat on many jet ski's 

Rail or Tube diameters this mount will fit:   

♦ Round Rails with .75-1.67 inch diameter (Horizontal)                                  

♦ Round Rails with .5-1.67 inch diameter (Vertical)                                                                  

♦ Square Rails .75-1.5 inch diameter (Horizontal) 

♦ Square Rails .5-1.67 inch diameter (Vertical)

Dimensions: 6.2" L x 2.75" W x 3.1" H (Height of screw plate)

Contents: 1 - Rail Mount with hardware (silver powder-coated aluminum); 4-2" SS screws and hex wrench (included)   

Common Uses: Butt or Pro "stand-up" seats on fishing boats; Fits between Pedestal & Butt Seat's 4 screw Connection 

Dimensions:  13.8" x 7.5"

Components: 1 - Butt/Pro Style Seat Mount  (silver powder coated aluminum)  

Common Uses: Deck Rails, Grills, Square Rails, Picnic Tables

Dimensions:  Clamp area:1.5"L x 3"W x 2.25" H (H = Maximum thickness of surface Clamp Mount will fit)

Contents:  1 - Clamp Mount  (Powder Coated Aluminum)

Common Uses: Fits any Vertical Surface or Side Walls: Deck Rails, Consoles, Seat Backs

Dimensions:  Screw Plate: 4.2" W x 2.6" H; Length out from Plate: 4.32";  Overall Height at post: 5.11"

Components:  1- Side Mount (silver powder coated aluminum); 4 SS screws included; Optional Back Plate available

Common uses:  Floors and Decks, Top of Consoles, Any Flat Surface

Dimensions:  Overall: 3.1" Dia. x 4.05" H;  Base: 3.1” Dia x .40” 

Contents:     - 1 -  Semi-Flush Deck Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws