Skip to Store Area:

Magento Commerce

You're currently on:

Search Site

Suction Mount

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Suction Mount

Common uses:   Temporary use on any dry, flat, smooth horizontal or vertical  surface area that is greater than or equal to  5" x 12.80" 


Dimensions:  Suction Mount Portion: 12.75" L x 4.5" W x 7.5" H;  Rail Mount Portion: 6.2" L x 2.75" W x 3.1" H (Height of screw plate)


Contents:  1 - Suction Lifter (Aluminum); 1  - Rail Mount (silver powder-coated aluminum) 

Availability: In stock.

$69.99
Add Items to Cart Add to Cart
Remember: A Mantis unit consists of both a mount and a Mantis cover. Remember not to purchase one without the other. You can also get both at the same time.


Common uses:   Temporary use on any dry, flat, smooth horizontal or vertical  surface area that is greater than or equal to  5" x 12.80" 


Dimensions:  Suction Mount Portion: 12.75" L x 4.5" W x 7.5" H;  Rail Mount Portion: 6.2" L x 2.75" W x 3.1" H (Height of screw plate)


Contents:  1 - Suction Lifter (Aluminum); 1  - Rail Mount (silver powder-coated aluminum) 


Mounting Instructions: (click here for illustrated mounting instructions)


1. SELECT LOCATION


Pro-Techt's Suction Mount is created by attaching our Rail Mount to the handle

area of a commercially available suction lifter. Our Suction Mount works on

horizonal and vertical surfaces by simply adjusting the positon of the rail mount.

In choosing a desired location, it is imperitive that the location be a flat, smooth,

and dry surface that is large enough to fully fit the suctions located at each end

of the Suction Mount.  

 

2. TEST AND INSTALL BRACKETS

 

Once you identify a desired location, you will need to confirm that the suction cups

will securely connect to your desired location. While holding the Suction Mount

in the desired position, engage the suction cups by moving the lever on each end

of the Suction Mount from its vertical (or perpedicular) position to its horizontal

position. Test the strength of the suction by exerting outward pressure via the

handle to confirm the suctions will securely adhere to your preferred location.

Retest strength of the suction after attaching the Mantis. Now refer to our rail

mount instructions to attach the rail mount to the handle of the suction lifter.

 

3. INSTALL MANTIS

 

Now place the Mantis assembly onto the vertical post of the bracket, and lock in place. Refer to the manual supplied with Mantis for detailed instructions.