Skip to Store Area:

Magento Commerce

You're currently on:

Search Site

Semi-Flush Mount Extra Bases/Back Plate

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Semi-Flush Mount Extra Bases/Back Plate


Common uses:  Use either as additional bases for your Semi-Flush Mount or as a Back Plate for your Semi-Flush Mount Bases.   Use on Floors and Decks, Top of Consoles, Any Flat Surface


Dimensions:  Overall:  Base: 3.1” Dia x .40” 


Contents included:  1 -  Semi-Flush Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws

Availability: In stock.

$14.99
Add Items to Cart Add to Cart
Remember: A Mantis unit consists of both a mount and a Mantis cover. Remember not to purchase one without the other. You can also get both at the same time.







Common uses:  Use either as additional bases for your Semi-Flush Mount or as a Back Plate for your Semi-Flush Mount Bases.   Use on Floors and Decks, Top of Consoles, Any Flat Surface


Dimensions:  Overall:  Base: 3.1” Dia x .40” 


Contents included:  1 -  Semi-Flush Mount  (chrome finish powder-coated aluminum);  3 -  #12 x 1.25" Stainless Screws




Mounting Instructions

 

1.  SELECT LOCATION, TAKE MOUNT BASE, MARK AND DRILL HOLES, INSTALL BASE

 

Take the round base, and with the smooth side facing upwards(grooves on the bottom), place where

you want to use your Mantis. Using the base's holes as a template, pencil the 3 hole locations onto

the mounting substrate. With a 3/16 inch diameter bit, drill holes in the marked positions. With a

Phillips screwdriver, install the round Base, using the 3 supplied screws. Be sure all screws are

securely tightened. If using Pro-Techt's optional back plate in conjunction with the Semi-Flush

mount, refer to the instructions that come with the back plate.

 

2. THREAD RING LOCK ON POST (Inside Lip facing down), TAKE POST/RING LOCK

AND ALIGN WITH BASE, SCREW POST INTO BASE, HAND TIGHTEN RING LOCK CLOCKWISE

 

If needed, thread the Ring Lock onto the Post (counter clockwise) with the inside lip of the Ring Lock

facing down. Then take the Post/Ring Lock and align with the threads on the inside of the Base and

screw (clockwise) the Post all the way into the Base. Then take the Ring Lock and firmly hand tighten

clockwise. To remove Post, turn Ring Lock counter-clockwise and unscrew post from Base.

 

3. INSTALL MANTIS

 

Now place the Mantis assembly onto the vertical post of the bracket, and lock in place. Refer to the

manual supplied with Mantis for detailed instructions.