Skip to Store Area:

Magento Commerce

You're currently on:

Search Site

Clamp Mount

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Clamp Mount

Common Uses: Deck Rails, Grills, Square Rails, Picnic Tables


Dimensions:  Clamp area:1.5"L x 3"W x 2.25" H (H = Maximum thickness of surface Clamp Mount will fit)


Contents:  1 - Clamp Mount  (Powder Coated Aluminum)

Availability: In stock.

$44.99
Add Items to Cart Add to Cart
Remember: A Mantis unit consists of both a mount and a Mantis cover. Remember not to purchase one without the other. You can also get both at the same time.


Common Uses: Deck Rails, Grills, Square Rails, Picnic Tables


Dimensions:  Clamp area:1.5"L x 3"W x 2.25" H (H = Maximum thickness of surface Clamp Mount will fit)


Contents:  1 - Clamp Mount  (Powder Coated Aluminum)


 


Mounting Instructions: (click here for illustrated mounting instructions)


1. LOOSEN SCREWS


After identifying a sturdy location for the Clamp Mount, rotate the screws counterclockwise.


2. SLIP CLAMP MOUNT ONTO MOUNTING LEDGE


With screw adequately loosened, slip the clamp mount into position. TIghten screws as


securely as possible by hand. Overtightening may damage the mounting surface. As the


screws become tight, alternate between each screw for final tightening. Similarly, when


removing the mount, begin by alternatively loosening each of the screws until they become


loose enough to remove the mount.


3. INSTALL MANTIS


Now place the Mantis assembly onto the vertical post of the


mount, and lock in place. Refer to the manual supplied with


Mantis for detailed instructions.


 Note: While unlikely, to prevent loss, damage or injury, we highly recommend that 


you attach a safety cord directly from your Mantis to a secure location if the


location you are connecting the mount to would result in the fall or loss of your


Mantis should the mount loosen and/or disengage.